New secondary cooling patterns tslab 2 0 parinktys peritectic and microalloyed steel ES leidiniai Leidinio metaduomenys This project is aimed at investigating the surface quality improvement achievable by a fine grain size and small grain boundary precipitate within the tslab 2 0 parinktys and sub-surface regions by use of an alternative secondary cooling practice when casting aluminium grain refined and microalloyed peritectic steel grades.
A specifically designed intense cooling unit for the intermediate thickness slab Rodyti daugiau caster at Corus Tuscaloosa has allowed optimisation of the operating conditions and an improvement of both as-cast and rolled product surface quality was notes.
The aim of the project was to improve product quality with two innovative concepts for an optimised heat transfer for slab casting of ultra low carbon and peritectic steels. Rodyti daugiau Industrial trials were carried out aiming at adjusted heat transfer in the mould.
Limited work with an intense secondary cooling was performed for Bloom at Scunthorpe while laboratory and pilot plant studies have demonstrated that an intense secondary cooling to increase the amount of grain boundary ferrite requires a casting speed around 0.
CRM has worked on a metallurgical study of the hot ductility improvement achievable by a grain refining treatment and numerical modelling indicates that the feasibility is rather limited as it should combine tslab 2 0 parinktys quenching to at least °C of 10 mm of the product, a reheating of this outer layer, and a progressive decrease of this layer to reach °C before unbending. Voest-Alpine Donawitz has worked at modifying the casting parameters superheat, casting rate, casting powder, primary cooling and secondary cooling strategies for avoiding surface and milijonierių dvejetainiai opcionai cracks on the CC3 bloom tslab 2 0 parinktys by means of SSCT tests, temperature measurement in the primary and secondary cooling zones and a numeric model.